Typical
Materials
Viscosity Range1
Low   Med  High
Air Cap
Model No.
Air Cap
Part No.		 Operating
Range
PSI     SCFM		 Typical
Pattern Size
In. (mm)		 Fluid Tip
No. & Size
In. (mm)
Type
of Feed2
Adhesives

•

 •

 24

 AV-40-243

 50

 14

 4-7 (100-175)

 D .086 (2.2)
E .070 (1.8)
FF .055 (1.4)		 P
Enamels,
Lacquers,
Metallics		 •

 •

30

 MB-4039-30

 50

 12

 8-10 (200-250)

 EX .070 (1.8)
FF .055 (1.4)
FX .042 (1.1)		 S
Gen. Purpose

 •

 •

35L

 AV-1239-35L4

 50

 4.8

 4-6 (100-150)

 E .070 (1.8)
FF .055 (1.4)
FX .042 (1.1)		 P, S
Gen. Purpose,
Enamels,
Lacquers		 •



58

 AV-439-58

 40

 6

 9 (225)

 E .070 (1.8)
EX .070 (1.8)
FF .055 (1.4)		 P, S

Heavy Body


•
62HD
MB-4039-62HD
80
19
8 (200)		 FX .042 (1.1)
AC .110 (1.8)
P
Porcelain Glazes   • 64HD MB-4039-64HD 80 22 13-14 (325-350) D .086 (2.2) P
Gen. Purpose
Enamels, Lacquers
 •

 •

80

 MB-4039-80

 60

 14 13 (325)

 EX .070 (1.8)
FW .062 (1.6)
FF .055 (1.4)		 S, G
Gen. Purpose,
All Finishes

•

704

 AV-1239-7043

 70

 21 10-12 (250-300)

 E .070 (1.8)
FF .055 (1.4)
FX .042 (1.1)		 P
Metallics,
High Solids
•
 •
 765
 AV-1239-7653
 80
 22
 15 (375)
 E .070 (1.8)
FF .055 (1.4)		 P
Automotive, High Solids
Base/Clear Coats,Urethanes
•
 •
 777
 31767-7773
 70
 23
 13-14 (325-350)
 E .070 (1.8)
FF .055 (1.4)		 P
Automotive, Metallics
High Solids
•
 •
 797
 AV-1239-7973
 70
 21
 17 (425)
 E .070 (1.8)
FF .055 (1.4)		 P
Gen. Purpose,
Automotive Finishes		 •
 •
 •
 9000
 AV-440-90009
AV-90003		 45
 12
 10 (250)
 FW .062 (1.6)
FF .055 (1.4)		 G, S
Gen. Purpose,Stains,
Lacquer Sealers		 •

907
 CV-39-905
 40
 4
 4.5 (112)
 F .042 (1.1)
 P, S
Heavy Body, Primers • • 927 CV-439-92 50 6 4.5 (112) E .070 (1.8) P, S
Detail, Touch-Up,
Stains, Lacquer		 •

3908
 EGA-40-3906
 30
 3
 3 (75)
 F .042 (1.1)
 P, S

1   Viscosity Cup Reference:
      Low = Up to 23 Seconds ZAHN #2
      Medium = 23-28 Seconds ZAHN #2
      High = 28+ Seconds ZAHN #2

2   Type of Feed Reference:
      G = Gravity
      P = Pressure
      S = Suction

3   Retaining Ring Required: Part No. MBC-368
4   Retaining Ring Required: Part No. MSA-1
5   Retaining Ring Required: Part No. EGA-11
6   Used with AGF-506 Automatic Spray Gun
7   Used with EGA-503 Manual Spray Gun
8   Includes Retaining Ring

Flow Rates for Fluid Tips

  Fluid Tip ID size In (mm) Flow Rate or Material
Pressure Feed
  G .028"(.70) Up to 12 oz./min.
  GX .034"(.85) Up to 16 oz./min.
  FX .042"(1.1) Up to 20 oz./min.
  FF .055"(1.4) Up to 30 oz./min.
  FW .062"(1.6) Up to 35 oz./min.
  E .070"(1.8) 40 oz./min. and over
  EE .070"(1.8) Porcelain Enamel
  D .086"(2.2) Heavy-body materials
  AC .110"(2.8) Heavy-body materials
Suction Feed
  EX .070"(1.8) Up to 12 oz./min.
Gravity Feed
  FF .055"(1.4) Up to 12 oz./min.
  FW .062"(1.6) Up to 14 oz./min.