|
HVLP Air Cap & Tip
Selection Chart
JGHV, MSV,
AGXV, and MAX
|
Typical
Coatings
Used With
|
*Typical
Solids By
Volume,
Viscosities
|
Air Cap
Model No.
Part No.
|
Air
Volume
(At 10 psi
Air Cap
Pressure) |
Typical
Fluid
Flow
Rates
|
Pattern
Size
|
**Recommended
Fluid
Tips
|
| Most common, low solids coatings,
i.e. enamels, lacquers, stains, sealers, primers, waterborne
adhesives,etc. |
Low solids, up to 25% solids by
volume
Up to 24 seconds, #4 Ford cup |
#28
JGHV-101-28 |
 |
| Low solids automotive finishes,
enamels, lacquers, stains, sealers, etc. |
Low solids, up to 25% solids by
volume
Up to 24 seconds, #4 Ford cup |
#33A
JGHV-101-33A |
 |
| Medium solids enamels, urethanes,
solvent and waterborne furniture topcoats, waterborne automotive
OEM finishes, corrosion protective coatings, leather stains,
acrylics, epoxies, etc. |
Low-medium solids, up to 50% solids
by volume
Up to 28 seconds, #4 Ford cup |
#46 MP
JGHV-101-46MP |
 |
| Medium-high solids enamels,
urethanes, low VOC waterborne furniture topcoats, porcelain
enamel, corrosion protective coatings, acrylics, epoxies,
architectural and industrial maintenance coatings, etc. |
Medium-high solids, up to 72%
solids by volume
Over 28 seconds, #4 Ford cup |
#83 MP
JGHV-101-83MP |
 |
*Viscosity Cup Reference
**Recommended Fluid Tips Shown. Other Sizes Available.
18 Seconds #4 Ford= 22 Seconds ZAHN #2
22 Seconds #4 Ford= 24 Seconds ZAHN #2
28 Seconds #4 Ford= 30 Seconds ZAHN #2
|
EGHV and TGHV
|
Typical
Coatings
Used With
|
Typical
Solids By
Volume,
Viscosities
|
Air Cap
Model No.
Part No.
|
Air
Volume
(At 10 psi
Air Cap
Pressure) |
Typical
Fluid
Flow
Rates
|
*Pattern
Size
|
Recommended
Fluid
Tips
|
| Detail, touch-up, enamels,
lacquers, etc. |
Low solids, up to 25% solids by
volume
Up to 24 seconds, #4 Ford cup |
#397 HV
EGHV-439-397HV |
 |
| Detail, touch-up, enamels,
lacquers, etc. |
Low solids, up to 25% solids by
volume
Up to 24 seconds, #4 Ford cup |
#90 HV
CV-39-90HV |
 |
| Most common, low solids coatings,
i.e. automotive refinish materials, enamels, lacquers, stains,
sealers, primers, waterbornes, etc. |
Low Solids, up to 30% solids by
volume
>Up to 24 seconds, #4 Ford cup |
#100
GTI-407-100 |
 |
*Spray pattern size dependent upon type of feed, material viscosity, and
air cap pressure. |
